|
SUPERLUX DRK681
8pc
PROFESSIONAL DRUM MICROPHONE SET
The Superlux DRK681
comprises of eight condenser microphones. The E100 in the set is designed for
low frequency instrument pick up using boundary technology. There are four
PRA383 miniature gooseneck microphones that can attach to tom toms, snare or any
instrument utilising the combined clip. There are also three E109 pencil type
condenser microphones for stand mounting to pick up high frequency instruments
such as hi-hat, cymbals or brass / stringed instruments. All these microphones
work with 9-52Vdc phantom power directly or through the supplied adaptors.
E100 Kick
Boundary Mic
-
Type: Back
electret condenser
-
Polar
Pattern: Half-Cardioid
-
Frequency
response: 30 to 18,000 Hz
-
Sensitivity at
1KHz open circuit voltage: -60dBV/Pa (1mV/Pa)
-
Rated
impedance: 600 ohms
-
Minimum load
impedance: 2K ohms
-
Equivalent noise
level: Less than 24dB, A-Weighted
-
Max. SPL (1K ohm
load) 149dB SPL (THD<1% 1kHz)
-
Dynamic range
(1K ohm load): 125dB
-
Power supply: 9-
52V phantom power
-
Current
consumption: 4mA
-
Connector:
3 pin male XLR type
-
Finish:
Black painted finish
-
Net
weight: 270 grams (9.5oz)
PRA383 Gooseneck
Mic
-
Type: Back
electret condenser
-
Polar
Pattern: Cardioid
-
Frequency
response: 40 to 18,000 Hz
-
Sensitivity at
1KHz open circuit voltage: -42dBV/Pa (8mV/Pa)
-
Rated
impedance: 200 ohms
-
Minimum load
impedance: 1K ohms
-
Equivalent noise
level: Less than 23dB, A-Weighted
-
Max. SPL (1K ohm
load) 137dB SPL (THD<1% 1kHz)
-
Dynamic range
(1K ohm load): 114dB
-
Power supply: 9-
52V phantom power
-
Current
consumption: 2.5mA
-
Connector:
3 pin male XLR type
-
Finish:
Black painted finish
-
Net
weight: 160 grams (4.2oz)
E109 Pencil
Condenser Mic
-
Type: Back
electret condenser
-
Polar
Pattern: Cardioid
-
Frequency
response: 40 to 20,000 Hz
-
Sensitivity at
1KHz open circuit voltage: -43dBV/Pa (7.1mV/Pa)
-
Rated
impedance: 200 ohms
-
Minimum load
impedance: 1K ohms
-
Equivalent noise
level: Less than 22dB, A-Weighted
-
Max. SPL (1K ohm
load) 137dB SPL (THD<1% 1kHz)
-
Dynamic range
(1K ohm load): 115dB
-
Power supply: 9-
52V phantom power
-
Current
consumption: 3.5mA
-
Connector:
3 pin male XLR type
-
Finish:
Black painted finish
-
Net
weight: 120 grams (4.2oz)
|
