FOSTEX NX-5A Nearfield Active Studio Monitors (pair)

FOSTEX NX-5A Nearfield active monitors (pair)

 

Created to offer a professional nearfield monitoring solution in tight spaces, the compact NX-5A excels in just about every department. The sound is full of clarity and audio accuracy, the stereo imaging is sharp and consistent and the level of sonic detail is incredible from a monitor so small.

Listen to a pair of powered Fostex NX Series reference monitors and you'll discover a superb natural sound with little colouration, deep tight lows and crystal clear highs, precise stereo imaging and an almost complete lack of distortion - even at high sound pressure levels.

Full of the latest in speaker technology and designed from the ground up for critical listening in both professional and project studios, broadcast and editing suites, or any other recording facility where a precise, transparent, professional sound is essential, the NX Series set new standards in sonic accuracy and packaging.

The engineering is superb with an internal wall design which eliminates standing waves, precision aluminium frames minimizing unwanted vibrations and a woofer which features a UDR tangential driver edge to eliminate unwanted resonances. - It all adds up.

Features

*   Low Frequency Unit 5" (130mm) with HR (Hyper Radial) diaphragm which utilises the latest diaphragm 'Radial Papermaking Technology'      for natural and smooth sound reproduction
*  UDR (Up/Down Roll) Tangential driver edge eliminates the unwanted resonance
*   Wide-range 20mm hard dome tweeter
*   With magnesium diaphragm to eliminate sharp-edges sound characteristics
*   Highly rigid cast aluminum frames for both LF and HF units which minimizes unwanted vibrations and resonances
*   Magnetically shielded drivers allow for safe placement close to a video monitor
*   Time-aligned front baffle enclosure design with the HF driver recessed for a precise and pure sound
*   Dedicated 60W (LF) + 40W (HF) bi-amplifier eliminates electric interference between the drivers
*   Dedicated tweeter level control (±3dB) cut/boost
*   LO EQ control: +2dB / 0dB / -2dB selectable for tailoring performance to the listening room
*   60W (LF) + 40W (HF) bi-amplifier
*   Hard dome tweeter with magnesium diaphragms to ensure a sound free from harsh metallic characteristics
*   LF driver with HR (Hyper Radial) diaphragm ensuring a smooth, natural sound with excellent mid/low frequency reproduction
*   Time-aligned front baffle design and internal HP Sound reflectors


Specification

*   Impedance 6 ohm (LF) / 8 ohm (HF)
*   Speaker Units
     LF unit 130mm HR diaphragm woofer
     HF unit 20mm Magnesium Dome tweeter
*   Frequency response 50Hz - 40kHz
*   Maximum Sound Pressure Level 104dB/W (Max/rated input)
*   Enclosure Type 2-way Bass reflex type with HP sound reflectors
*   Outpt power
     LF 60W (typical)
     HF 40W (typical)
*   Input - Balanced Connector XLR-3-31 type (Pin 2:HOT) x 1
*   Impedance > 10k ohm
*   Level +4dBu
*   Input - Unbalanced Connector ø 6mm phone jack x 1
*   Impedance > 10k ohm
*   Level -10dBV
*   Crossover Frequencies 5kHz / -6dB / Oct (LF) & 3.5kHz / -12dB / Oct(HF)
*   Tweeter Level Control ±3dB variable
*   / Lo EQ control 55Hz, +2dB / 0dB / -2dB selectable

*   Dimensions 190(W) x 300(H) x 320(D)mm
*   Weight Approx. 10kg
*   Power Requirements 230V, 50/60Hz
*   Power Consumption 75W

 

 

 

£