Avantone CK1 Multi-Capsule Condenser Microphone + Shock Mount Adapter + Wooden Box |
Avantone CK1 Multi-Capsule Condenser Microphone + Shock Mount Adapter + Wooden Box
The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The AVANTONE CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost! The rugged CK-1 microphone body and capsule assembly are precision machined of BRASS. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion miking…It exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano. The CK-1 INCLUDES (3) 19mm (3/4") interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character. The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task. The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. Separate -10 dB pad & 80 Hz LF roll off switches
|
Type
True Condenser Polar Pattern/s Cardioid , Hyper-Cardioid & Omni Capsules included Frequency Response 25-20,000 Hz +/- 3dB Sensitivity 15mv/pa Output Impedance <=200 Ohms Maximum SPL 138dB (0.5% THD @1000Hz) S/N Ratio re 1Pa 78dB Noise Floor < 17 dBA Output Connector: Male XLR 3 pin High-Pass Switch 80 Hz 6dB/octave Attenuation Switch -10 dB Included Accessories 3 Capsules, Padded Wooden Box & SSM Shockmount Power Requirement Standard 48 Volt Phantom / 5mA Dimensions (23mm) x (153mm) Weight 5 oz. Finish Polished Nickel trim / Metallic Cabernet Red Body
£